89
PC Card Designs
Inserting and ejecting a PC Card
Insert a PC card into the slot with the front side facing
to you.
Push the card until it clicks, then the eject button pops
out.
1 PC Card
2 Eject Button
NOTE:
When the card is properly set, the red bar on the eject
button will show.
Ejecting the PC card
Press the Eject Button to eject the PC card.
Take out the PC card from the machine.
NOTE:
When the power is turned on with a PC card inserted
in the machine, it will take sometime to get the
machine booted up.
Selecting the PC card designs
Press the PC card key. The designs contained in the
card are displayed on the pattern selection keys.
Press the pattern selection key to select the design
you wish to sew.
The selected design and its color parts will be shown
in their sewing order.
CAUTION:
Do not turn the power off or eject the card while the
warning sign or hourglass is displayed.
SET
Edit
A Z
PC Card NO.1001
Hoop Size A(F):126x110mm
2
1
3
4
2
1
1
2
2
Janome Memory Craft 9500 Instruction Manual
MC9500 Owners Manual/ User Guide
To Next Page
Loading...
