Janome MyStyle 100 - Threading the Machine

22
b
z
x
c
b
v
q
w
e
r
t
y
Threading the Machine
To set the needle thread:
Raise the presser foot.
Press the needle up/down button to raise the
thread take-up lever to its highest position.
z Draw the thread from the spool and pass it
under
the thread guide.
q Thread guide
x Draw the thread down along the right
channel and pull it up around the bottom of the
thread guide plate.
Pull the thread up along the left channel.
w Right channel
e Thread guide plate
r Left channel
c Firmly draw the thread from right to left over
the thread take-up lever and down into the
take-up lever eye.
t Thread take-up lever
v Draw the thread down along the left channel
and slip the thread behind the needle bar
thread guide from the left.
y Needle bar thread guide
b Pass the thread through the needle eye from
the front.
Janome MyStyle 100 Sewing Machine Instruciton Manual
www.janomeflyer.com
MyStyle 100 Owners Manual/ User Guide