Janome TM30 - Altering the Buttonhole Width; Altering the Buttonhole Density

31
Altering the buttonhole width
Press the mode key q once. The green light w is lit at
the stitch width adjustment mode ( ).
Press the “ ” sign on the value set key e to increase the
buttonhole width.
Press the “ ” sign on the value set key e to decrease
the buttonhole width.
q Mode key
w Green light
e Value set key
r Buttonhole width
NOTE:
The buttonhole width can be adjusted from 2.5 to 5.0.
Altering the buttonhole density
Press the mode key q twice. The green light w is lit at
the stitch length adjustment mode ( ).
Press the “ ” sign on the value set key e to decrease
the buttonhole density.
Press the “ ” sign on the value set key e to increase the
buttonhole density.
q Mode key
w Green light
e Value set key
r Buttonhole density
NOTE:
The buttonhole density can be adjusted from 0.2 to 0.8.
e
e
q
w
q
w
r r
r r