Janome TM30 - Standard Accessories; Setting the Spool Pin

4
Standard Accessories
q w e
r
!1 !2
!3 !4 !5
!7
*The power cable included may differ from the illustration.
ut
o !0
y
No. Part Name Part No.
1 Zigzag foot A (Set on the machine) 685502019
2 Zipper foot E 808852003
3 Satin stitch foot F 82 28 04118
4 Sliding buttonhole foot 508803000
5 Spool holder (large) 822020503
6 Spool holder (small) 822019509
7 Spool pin 660005032
8 Extra spool pin 625031500
9 Bobbin X 3 (1 set on the machine) 102261000
10 Needle set 639804000
11 Seam ripper (Buttonhole opener) 647808009
12 Lint brush 802424004
13 Screwdriver 653802002
14 Instruction book 805800362
15 Soft cover 743812203
16 Foot control 808550008
17 Power cable*
U.S.A and Canada 856519004
U.K. 830377008
Australia 830314018
Continental Europe 830335004
!6
Setting the Spool Pin
Insert the spool pin into the hole as shown.
q Spool pin
w Hole
q
w
i