Need help?Do you have a question about the Janome XL601 and is the answer not in the manual?
General| Stitch Options | 60 |
|---|---|
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Needle Threading System | Automatic |
| Foot Control | Yes |
| LCD Display | Yes |
| Stitch Count | 60 |
| Weight | 6 kg |
| Bobbin Type | Top-loading |
Procedure to set the correct distance between the presser foot and needle plate.
Adjusting the needle's position in the needle plate hole for optimal stitch formation.
Aligning the rotary hook with the needle for proper thread pickup.
Setting the needle bar height relative to the hook timing and needle eye.
Adjusting the clearance between the needle and the tip of the rotary hook.
Setting the optimal height of the feed dogs for fabric movement.
Method for adjusting the upper thread tension to the specified range.
To Next Page