Jasic MIG 350P - Symbol Descriptions

OPERATOR’S MANUAL · MIG/MAG PULSE SERIES
-
9
-
4.2 Symbol description
Table 4-1: Symbols on the front panel
Symbol
Description
Output terminal “-” of the welding
machine
Output terminal “+” of the welding
machine
Table 4-2: Symbols on the back panel
Symbol AC36V 1 0
Description
Power source of the
heater
Input cable of the
welding machine
Breaker “ON” Breaker “OFF”
Table 4-3: Symbols on the nameplate
Symbol Description Symbol Description
U
0
Rated no-load voltage Gas shielded arc welding
U
1
Rated input voltage MMA
U
2
Conventional load voltage Three-phase 50/60Hz input
I
1
max Maximum rated input current DC output
I
1
eff
Maximum effective input
current
Symbol for inverter welder
I
2
Rated welding current X Duty cycle