Jasic MIG 350P - Technical and Functional Parameters

OPERATOR’S MANUAL · MIG/MAG PULSE SERIES
- 6 -
3.1.5 User interface
1) Graphical coordinate panel
2) Single-knob stepless digital adjustment
3) Double 3-digit display
3.2 Technical parameters
MODEL MIG350P(N316) MIG400P(N317)
Input voltage 3-phase 380V±15% (50/60Hz) 3-phase 380V±15% (50/60Hz)
Recommended fuse capacity 40A 50A
Rated output 350A/34V 400A/36V
Rated no-load voltage 70V 70V
Rated no-load current ＜1A ＜1A
Rated duty cycle (40℃) 60% 60%
Power factor COSφ≥0.85 COSφ≥0.85
Efficiency η≥85% η≥85%
Insulation class F F
Protection class IP21S IP21S
Welding current range 10-350A 10-400A
Wire feed speed range 1.0-18.0m/min 1.0-18.0m/min
Welding voltage range 12.0-39.0V 12.0-39.0V
Torch connection European type European type
Maximum diameter of wire spool S200/S300, 300mm S200/S300, 300mm
Wire diameter 0.8-1.6mm 0.8-1.6mm
3.3 Functional parameters
MMA
MIG350P(N316) MIG400P(N317)
Welding current range 10-350A 10-400A
Arc force current range
0-99（A/ms, absolute maximum:
250A
）
0-99（A/ms, absolute maximum:
250A
）
Arc ignition current range 10-350A 10-400A
Arc ignition time range 0-0.99s 0-0.99s
Arc breaking voltage range 40.0-80.0V 40.0-80.0V
MIG/MAG MIG350P(N316) MIG400P(N317)
Pre-flow time 0-5.0s 0-5.0s
Post-flow time 0-9.9s 0-9.9s
Operation mode 4 modes 4 modes
Wire feed speed range 1.0-18.0 m/min 1.0-18.0 m/min
Welding current range 20-350A 20-400A
Base metal thickness range 0.5-20.0mm 0.5-20.0mm
Welding voltage range 12.0-40.0V 12.0-40.0V
Arc force range -15-+15 -15-+15
LF pulse frequency range 0.5-5.0Hz 0.5-5.0Hz
LF pulse duration ratio range 10-90% 10-90%
Upslope time 0.1-9.9s 0.1-9.9s
Downslope time 0.1-9.9s 0.1-9.9s