Jasic MIG SERIES - Technical Specifications

10
TECHNICAL SPECIFICATIONS
Please Note
Due to variaons in manufactured products all claimed performance rangs, capacies, measurements,
dimensions and weights quoted are approximate only. Achievable performance and rangs when in use
can depend upon correct installaon, applicaons and use along with regular maintenance and service.
Parameter Unit Jasic MIG 200 Synergic (JM-200CS)
Rated input voltage V AC230V±15% 50/60Hz
Rated input power kVA 9.4
Rated input current Imax A 35.6
Rated input current Ie A 21
Welding current range
A MIG 30 ~ 200
MMA 10 ~ 200
TIG 10 ~ 200
No-load voltage V 53
Rated duty cycle (40°C)
% MIG 200A @ 35%
MMA 200A @ 35%
TIG 200A @ 35%
Eciency % 85
Power factor cosφ 0.7
Standard - EN60974-1
Protecon class IP IP21S
Insulaon class - F
Noise db <70
Operang temperature range °C -10 ~ +40
Storage temperature °C -25 ~ +55
MIG recommended wire size mm 0.6/0.8/1.0
Wire spool size mm 200mm
MMA recommended electrode size mm 1.6 ~ 5.0
Overall size mm 485 X 185 X 370
Weight Kg 12.8