11
CONTROLS
Front view Jasic MIG 200CS
1. Voltage digital display
2. Current digital display
3. MMA current and wire feed speed control dial
4. "-" Output terminal
5. Euro outlet for MIG torch
6. "+" Output terminal
7. 2T/4T torch trigger mode switch
8. Welding mode control switch
9. Voltage/arc force and downslope me control dial
Rear view Jasic MIG 200CS
10. Power switch: The ON/OFF mains switch for the machine
11. Gas inlet connecon: The gas inlet that allows you to
connect the gas supply from the gas regulator
12. Cooling fans: The entry for the air to access the cooling
fans
13. Input cable gland: The entry for the mains power cable
To Next Page
Loading...
