Jason International, Inc. · 501.771.4477 Page 6 of 16 Customer Service: 800.255.5766
Copyright © 2021 Jason International, Inc.
AIRMASSEUR
®
FEATURES
Jason’s AirMasseur hydrotherapy bath fills the bath with
millions of warm air bubbles to create a blanket of
rolling movement, gently massaging your skin. This
results in an enhanced sense of calm and relaxation as
you receive a delicate, full body massage.
AirMasseur
®
Blower
The blower generates warm air and pushes it through
the strategically placed air jets. The Jason Integrity
®
AirMasseur system contains a variable speed-controlled
heated air blower. Blowers provided on Jason baths are
factory tested when assembled on the bath.
Air ON/OFF Button
The Air On/Off button (air
switch activator) allows
the user to turn the blower
On and Off and controls
the blower’s intensity.
Momentarily depress the
button to start or stop the
air blower. A timer will automatically stop the air blower
after 20 minutes of operation if it is not stopped
manually.
Blower Speed
Once the blower is On, to decrease the air output, press
and hold the Air On/Off button until the desired intensity
is reached, then release the button. To increase the air
intensity, press and hold the Air On/Off button until the
desired intensity is reached, then release the button.
AirMasseur
®
Automatic Purge
Fifteen (15) minutes after the blower is stopped, the
blower will start again for a two (2) minute purge cycle
that dries the air channel.
WHIRLPOOL FEATURES
Jason’s Whirlpool hydrotherapy bath utilizes Perfect
Pressure/Perfect Flow jets that are directed at key
muscle groups allowing them to relax and rejuvenate.
The strong, rolling water flow and comfort of heat
contribute to an overall feeling of relaxation and
decreased muscle tension.
Whirlpool Pump
Whirlpool pumps provided on Jason baths are factory
tested after installation on the bath. The pumps are of
efficient design incorporating high quality long life seals
which provide superior service. However, should the
pump need service; suction and discharge unions are
provided for easy pump removal.
Whirlpool Jets
Strategically placed whirlpool jets are provided for
complete enjoyment of your bath. The jets are specially
designed for maximum whirlpool action with directional
capabilities. By changing the direction of the jets, you
can concentrate the massaging jet stream to your area
of preference. You can also individually adjust the flow
of each jet.
Air ON/OFF Button
The Air On/Off button (air
switch activator) provides
a safe and convenient
method for controlling the
Whirlpool bath. The Air
On/Off button is factory
mounted onto the bath
prior to shipment. To
operate, fill the bath to at least two (2) inches above the
jets and press the Air On/Off button to start or stop the
whirlpool pump.
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
To Next Page
Loading...