Javad TRIUMPH-1 - User Manual

All contents in this manual are copyrighted by JAVAD GNSS.
All rights reserved.The information contained herein may not be used, accessed, copied,
stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express
written consent from JAVAD GNSS.
TRIUMPH-1
Integrated GNSS Receiver
Operator’s Manual
Version 1.3
Last Revised February 24, 2009

Summary

Chapter 2: Pre-Survey Preparation

Installing JAVAD GNSS Software

Battery Charging and Power Management

Instructions for charging batteries and managing power settings for optimal receiver operation.

Connecting the Receiver to a Computer

Procedures for establishing wireless, RS232, and USB connections for data transfer and configuration.

Chapter 3: Configuration

Configuring Modems and GSM Modules

Detailed steps for configuring internal/external UHF modems and GSM modules for communication.

Receiver and MinPad Configuration

Chapter 7: Troubleshooting

Basic Troubleshooting and Power Issues

Initial checks and common solutions for receiver issues, including powering problems.

Advanced Receiver Problem Solving

Diagnosing issues like satellite lock, configuration errors, poor geometry, and communication problems.

Appendix C: Safety Warnings

General, Battery, and Power Supply Safety

Critical safety instructions for operating, handling the receiver, batteries, and power supply.

Javad TRIUMPH-1 Specifications

General

Type	GNSS Receiver
Operating Temperature	-40°C to +65°C
IP Rating	IP67
Frequency Bands	L1/L2/L2C/L5
Static Accuracy Vertical	5 mm
Data Storage	8 GB internal
Communication Interfaces	Bluetooth, USB, Serial
Battery Life	Up to 10 hours