8-17
Sewage (black) tank preparation:
1. Release one to two quarts (1 or 2 liters) of water into the toilet bowl.
2. Follow the directions on your toilet chemical bottle (customer supplied), by
placing the recommended quantity of holding tank chemical into the toilet
bowl.
3. Flush the toilet and allow at least two gallons (8 liters) of water to flow into the
holding tank.
Cleaning & Maintenance:
The toilet should be cleaned regularly for maximum sanitation and operational
efficiency. Do not use chlorine (undiluted) or caustic chemicals, such as laundry
bleach or drain opening types, in the toilet system. These products damage the
seals in toilets and dump valves.
WARNING
It is important to add enough water to prevent solid waste buildup. Follow the
directions listed below and in the manufacturer’s operator manual.
To Next Page
Loading...
Need help?
General
