Driver Mode
The Driver Mode will allow you to adjust / set the Self- timer, or take three consecutive
pictures in the Burst Mode.
- Self timer
Browse and select the Driver Mode then press the Right button to access the available
Self Timer options then select 2 or 10 seconds delay time.
Press OK to confirm, then press MENU to exit setting.
Press the Shutter button and camera “beep” while counting down the delay time, then the
picture will be automatically taken.
Note: You can also access the Self Timer / Setting mode when the camera is set in
Camera Mode. Press the Right Button to access the Self-timer setting.
- Burst / Consecutive photos:
Activate the Camera, then press the MENU button.
Select the Driver Mode and Set the Burst option.
Press OK to confirm, then MENU to exit setting.
Press the Shutter button and the camera will automatically take three consecutive
pictures.
To Next Page
Loading...
