ENGLISH
14 EN
BLUETOOTH
RECEIVED LIST
Display the last call you have received.
“RECEIVED LIST” is displayed on LCD and star-
ing with the very last received number on the list,
you can use the volume knob (26) to scan the last
received numbers. You can shortly press button (4)
to confirm the dialing.
DIALED LIST
Display the last 10 dialed number.
“DIALED LIST” is displayed on LCD and starting
with the very last dialed number. You can use the
volume knob (26) to scan the numbers. And you
can shortly press button (4) to confirm the dialing.
MISSED LIST
Display the call you have missed.
“MISSED LIST” is displayed on LCD and starting
with the very last missed number. You can use the
volume knob (26) to scan the numbers. And you
can shortly press button (4) to confirm the dialing.
PHONE BOOK (Mobile Phone)
Display the phone number you stored in your mobile
phone. You can use the volume knob (26) to scan
the phone numbers stored in phone book. And you
can shortly press button (4) to confirm the dialing.
PHONE BOOK (SIM)
Display the phone number you stored in your SIM
card. The operation is the same as PHONE BOOK
for mobile phone.
AUTO ANSWER: ON/OFF
In auto answer on mode, when a call coming “AN-
SWER?+ Phone Number” will appear on LCD. The
unit will answer the call automatically. In auto answer
off mode, when a call coming, “ANSWER?+ Phone
Number” will appear on LCD. you can press button
(4) to answer the call, or press button (24) to reject
the incoming call.
TALK VOLUME
Display the current talk volume level, you can use
the volume knob (26) to adjust the initial talking vol-
ume level on the loudspeakers of unit side.
ANSWERING/REJECTING AN
INCOMING CALL
Please refer to the AUTO ANSWER: ON/OFF para-
graph in T-MENU section.
MAKING AN OUTGOING CALL
1. Making an outgoing call from SPEED DIAL, RECEIVED LIST,
DIALED LIST, MISSED LIST, PHONE BOOK(Mobile Phone) and
PHONE BOOK (SIM Card) please refer to the T-MENU section.
2. Making an outgoing call by inputting the phone number manu
ally. Press button (4) on the front panel
“CALL_” will appear on LCD. Use 0~9, *, # buttons to enter the
phone number you want to dial.
(Note: shortly press # button will input “#” character, press and
hold it will input “+” character). Then press button (4) again will
call the number.
if you input the wrong number, shortly press CLR button (24)
will clear it. Press and hold CLR button (24) will clear all nu-
meric.
3. Making a voice dialing (the pairing mobile phone must support
voice dialing feature.) Press and hold button (4) to activate the
voice dialing function, “Voice Dialing…” will appear, then “Voice
Speaking...” will be displayed and you can hear a beep tone
to hint input the voice information. You have several seconds
time to speak out the name as recorded in the mobile phone
Voice Dial list. Then the unit will dial the number automatically.
If the voice is not recognized, after several seconds, “Voice No
Match!” the unit will return to the previous mode automatically.
TRANSFER THE CALL BETWEEN
MOBILE PHONE AND THE UNIT
During the talking mode, you can press and hold T-
MENU button (6) to transfer the phone call between
the mobile phone and the unit. And “Call Transfer!”
will be displayed on the LCD for several seconds.
1) If you transfer the call to mobile phone, the mute of the
To Next Page
Loading...