ENGLISH
09EN
BASIC
MUTE
Shortly press button (14) will mute the sound, press
it again will resume the sound.
EQUALIZATION
Press EQ button (22) to turn on equalization func-
tion and to select desired audio mode. There are
five different modesas below:
→ FLAT→ CLAS→ POP → ROCK →DSP OFF
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and active functions on
the display (7).
REMOTE SENSOR
Point the remote control handset to the remote
sensor (30). Press the function keys on the handset
to control the system.
ESP FUNCTION
The unit can be shockproof about ten seconds.
AUXILIARY INPUT
The unit can be connected to a portable audio
player through the auxiliary input jack AUX IN (23)
on the front panel or AUX IN jack on the back of
the unit. After finishing the connection, you can
press MOD button (5) on the front panel to switch
the mode to AUX IN mode.
RESET FUNCTION
Reset button (25) must be activated with either a
ballpoint pen or thin metal object. The reset but-
ton is to be activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
If the unit doesn’t work after pressing the
reset button (25), please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
To Next Page
Loading...
