EasyManua.ls Logo

JB.lab K7 - Specification

JB.lab K7
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
17EN
SPECIFIATION
order. When playing MP3/WMA disc, press and
hold it to play all tracks (in the current folder) in ran-
dom order.
18. 0, 1~9
Numeric buttons.
19. SEL
Press SEL to enter audio setting mode, the adjust-
ment mode will change in the following order, such
as:
Bass Treble Balance Fader
Press and hold it to enter SYSTEM SETTING
mode. And you can Use TRK/TUN
/ to adjust
the to select the item, and use VOL / to correspond-
ing value.
SPECIFIATION
Power Sup ply Requirements : DC 12 Volts, Negative Ground
Chassis Dimensions : 178 (W) x 160 (D) x 50 (H)
Tone Controls
Bass (at 100 Hz) : ±10 dB
Treble (at 10 kHz) : ±10 dB
Maximum Output Power
Version Y : 4 x 120 watts
Current Drain
Version Y : 15 Ampere (max.)
(For High Power Version)
CD PLAYER
Signal to Noise Ratio : More than 55 dB
Channel Separation : More than 50 dB
Frequency Response : 40Hz – 18 kHz
RADIO
For 2 Bands
(Asia)
FM
Frequency Coverage 87.5 to 108 MHz
IF 10.7 MHz
Sensitivity (S/N=30dB) 10 dBu
Stereo Separation >25dB
AM
Frequency Coverage 531 to 1602 kHz
IF 450 kHz
Sensitivity (S/N=20dB) 36 dBu

Table of Contents

Related product manuals