JBL Performance AV1 - Page 121

AV1 Mode Adjust
5-23
DECODING
The table below indicates the conditions in which DTS-ES
decoding is engaged.
• DTS-ES decoding is engaged when the ES DECODING
parameter is set to ON, or the ES DECODING parameter is set
to AUTO and a 5.1-channel matrix-encoded or 6.1-channel
discrete-encoded DTS-ES source is detected.
• DTS-ES decoding is not engaged when the ES DECODING
parameter is set to OFF, or the ES DECODING parameter is set
to AUTO and a 5.1-channel DTS source is detected.
• Listening mode names differ depending on the encoding
present in the input source, the ES DECODING parameter
Setting and the speaker setup.
– DTS-ES listening modes are available when DTS-ES decod-
ing is engaged.
– DTS listening modes are available when DTS-ES decoding is
not engaged.
–
DTS-ES listening modes cannot be activated unless both side
and rear speakers are present.
Note:
The table below is not applicable to the DTS-ES THX, DTS THX
ULTRA2, and DTS THX MUSIC listening modes.
Input Source
Parameter Setting 5.1-Channel DTS
5.1-Channel
Matrix-Encoded DTS-ES
6.1-Channel
Discrete-Encoded DTS-ES
ES DECODING: AUTO DTS DTS-ES DTS-ES
ES DECODING: ON DTS-ES DTS-ES DTS-ES
ES DECODING: OFF DTS DTS DTS