Setup JBL Performance
3-50
FRONT PANEL DISPLAY SETUP
STATUS ALWAYS ON, 2 SECONDS, ALWAYS OFF
Activates and deactivates the front-panel display. When set to
ALWAYS ON, the front-panel display remains on at all times. When
set to 2 SECONDS, the front-panel display appears for 2 seconds
whenever the input source changes or the AV1 receives a com-
mand. When ALWAYS OFF, the front-panel display remains off at all
times.
Note:
When the FRONT PANEL DISPLAY menu STATUS parameter is ALWAYS
OFF, the front-panel display immediately disappears. Press the remote
control FP button or use the on-screen display as a guide to reset the
parameter to ALWAYS ON or 2 SECONDS.
BRIGHTNESS 100%, 75%, 50%, 25%
Controls the brightness of front-panel display characters. When a
setting is selected, front-panel display illumination automatically
adjusts to the selected brightness.
DISPLAYSSETUP
FRONT PANEL DISPLAY
Opens the FRONT PANEL DISPLAY menu, which is used to customize the front-panel display.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
DISPLAY SETUP
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY
CUSTOM NAME
EDIT CUSTOM NAME
OFF
OFF
ALWAYS ON
2 SECONDS
ON-SCREEN DISPLAY
STATUS
BRIGHTNESS
ALWAYS ON
100%
ALWAYS OFF
Parameter
Default
Setting
Possible
Settings
STATUS ALWAYS ON ALWAYS ON, 2 SECONDS,
ALWAYS OFF
BRIGHTNESS 100% 100%, 75%, 50%, 25%
STATUS
DISPLAYSSETUP
FRONT PANEL DISPLAY
BRIGHTNESS
DISPLAYSSETUP
FRONT PANEL DISPLAY
To Next Page
Loading...
