jcb 1CXT - Removing the Lift Arm Safety Strut

01 - Machine
03 - Safety
27 - Maintenance Positions
01 - 14 9813/6050-2 01 - 14
4.2. Secure the strut in position with strap.
5. Lower the lift arm onto the strut.
5.1. Start the engine and slowly lower the
lift arms onto the safety strut, stop the
movement immediately when the weight of
the lift arms are supported by the safety
strut.
Removing the Lift Arm Safety Strut
1. Fully raise the lift arms to take the weight off the
safety strut.
2. Stop the engine and remove the ignition key.
3. Remove the strut.
3.1. Loosen the strap.
3.2. Remove the strut from the ram piston rod.
4. Stow the strut.
4.1. Secure the strut in the stowage position with
the fastener. Refer to Figure 4.
Figure 4.
A
D
C
B
A Fastener- unlock position B Fastener- lock position
C Strap D Safety strut