03 - Attachments, Couplings and Load Handling
10 - Excavator End Quickhitch
03 - Mechanical Quickhitch
03 - 17 9813/6050-2 03 - 17
03 - Mechanical Quickhitch
Introduction .................................................... 03-17
Remove and Install ....................................... 03-18
Introduction
The operation of the mechanical quickhitch is done,
usually by the use of tools, at the quickhitch. The
operator needs to leave the operator's station to go
to the end of the work equipment in order to effect the
release of the bucket or attachment, and to do the
same in order to attach the next bucket or attachment
to be used.
To Next Page
Loading...
