Important safety instructions
Disconnect the power supply whenever you proceed
to the installation or repair of the equipment.
In compliance with the European Low Voltage Directive, we inform you of the fol-
lowing requirements:
•When the devices remain permanently connected, an easily accessible connecting
device must be incorporated into the wiring.
•This system must only be installed by qualified professionals that have with auto-
mated garagedoors and knowledge of therelevant European standards.
•The user instructions for this devicemust always be in the user’s possession.
•The operating frequency of thereceiver does not interfere in any way with the868
MHz remotecontrol systems.
Use of the equipment
This device is designed for applications with an automated garage door. It is not guar-
anteed for the direct activation of devices other than those specified. The man-
ufacturer reserves the right to change the device specifications without warning.
More tips, interactive demos and online videos.
jcmtechnologies
3
To Next Page
Loading...