Regulatory Data
EU Declaration of conformity
JCM TECHNOLOGIES, S.A. hereby declares that the product RB3 R868 & RB3
T868 complies with the relevant fundamental requirements of the RED Directive
2014/53/EU, as well as with the Machine Directive 2006/42/EC whenever its usage is
foreseen; and with the 2011/65/EU RoHS Directive.
See website https://www.jcm-tech.com/declarations/
JCM TECHNOLOGIES, SA
C/COSTA D'EN PARATGE, 6B
08500 VIC (BARCELONA)
SPAIN
In order to comply with the EN 12978:2003+A1:2009 product standard and assure the
correct operation of the system, it is mandatory to follow the instructions below, to
avoid serious dangerous to persons.
If the door cycle is smaller than 7s, the system must
be used only in WORK mode.
The system complies with EN ISO 13849-1:2015, category 2, PLd. Certified by TÜV
NORD CERT GmbH.
jcmtechnologies
28
UM_3201471_RB3S SYSTEM_EN_Rev00
To Next Page
Loading...