10 ORL-55 JDSU
3 G
ETTING STARTED
Table. 1 Device overview and key pad
1 Test head cover
2 Test adapter
3 Display
4 Stand (rear side)
5 Power supply socket, USB interface
6 Battery compartment (rear side)
7 key pad
Wavelength
Select a wavelengthfrom the list
Backlight
Activate display backlight
Previous
Step one menu level backwards
(without storing settings).
MENU/ENTER
• Open menu and select menu item
• store settings
Power ON/OFF
Switch unit on and off.
Up/Down
• Scroll menu up/down
• Change levels, wavelenghts
Laser ON/OFF
Switch laser on/off
STORE
Store displayed values
Device mode
Toggle between modes:
Power Meter Laser Source
Return Loss Test ...
To Next Page
Loading...
