EasyManua.ls Logo

Jeanneau 53 - Stern Anchoring

Jeanneau 53
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42/154
119635
Index G
OPERATION
STERN ANCHORING
Stern anchoring shall be performed with the engine declutched.
- Secure the required length of cablet on the mooring cleat.
- Pay out the anchor line slowly.
- Take care not to damage the propeller or the rudder.
Battery switches to be turned on:
1. Common negative
2. Positive engine
The windlass is powered by the engine
battery.
Access
Operation relay -
Skipper's cabin
Breaker -
Port aft cabin
ADVICE - RECOMMENDATION
- After each trip rinse the windlass and anchor chain or rode with fresh water.
- Check the swinging area once the boat is at anchor.

Table of Contents

Other manuals for Jeanneau 53

Related product manuals