EasyManua.ls Logo

Jeanneau 53 - Automatic In-Mast Reefing Block Diagram; Laxy-Bag: Fitting; Passage - Reef Detail

Jeanneau 53
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
68/154
119635
Index G
LAZY-BAG: FITTING
- Spread out the lazy-bag on the deck.
- Slide the battens in and close the batten pockets.
- Hank on the lazy-bag until you have the front part about level with the gooseneck.
- Fasten the lazy-bag to the tack with the strap provided.
- Stretch the lazy-bag from the back before you fasten the lazy-jacks.
- Put the mainsail into the lazy-bag.
ADVICE - RECOMMENDATION
- When you are not sailing, slacken the genoa halyard.
- Install the lazy-bag before the mainsail.
- When the sail is unfurled, adjust the halyard tightness.
- Too much tightness may cause furling problems.
- After taking in a reef for the first time mark the halyard position at the clutch (marker
pen or light stitched label)in order to be able to let out the sheet with precision in
subsequent manoeuvres.
Automatic in-mast reefing block diagram
Passage - Reef
Detail
ADVICE - RECOMMENDATION
- At the end of the sailing season, and if possible before winter, leave your sails to a
specialist to have efficient maintenance and repairs.

Table of Contents

Other manuals for Jeanneau 53

Related product manuals