- 108 -
Manual control of the air-conditioning
1. Data display
Screen which displays the desired temperature, the programmed values and the error
messages.
2. MODE
Enables you to navigate between the different operating modes.
3. POWER/OFF
Comes on when the system is switched off. The manual ventilator may continue to run.
4. COOL
Indicates that the compressor is activated when cooling.
5. HEAT
Indicates that the compressor is activated when heating.
6. Optional equipment (Auxiliary heating).
7. AUTOMATIC
Comes on when the system is in AUTO mode.
8. DEHUMIDIFY
Comes on when the system is in dehumidifying mode.
9. Keys + and -
Allow you to raise or lower the desired temperature.
10. Cooling indicator
This indicates that the compressor is in COOLING mode.
11. Heating indicator
This indicates that the compressor is in HEATING mode.
12. Optional equipment (Auxiliary heating).
13. temperature control indicator
This indicates the temperature control adjustment (the desired ambient temperature).
14. Indicator for the manual ventilator
This comes on when the manual ventilator is running.
To Previous Page