248 IN CASE OF EMERGENCY
6. Insert the new bulb in the socket.
7. Reinstall the bulb and socket into the lamp
assembly by turning it clockwise, making
sure it is locked into place.
8. Reconnect the electrical connector.
9. Reinstall the lamp assembly on the car,
making sure it is locked into place.
Side Indicators on External Rear View Mirrors –
(If Equipped)
To replace the bulb proceed as follows:
1. Remove the mirror cap on the outside rear
view mirror.
Mirror Cap
Removing the mirror cap
2. Remove the transparent lens assembly as
shown.
Transparent Lens
3. Remove the bulb socket and bulb from the
transparent lens assembly by rotating the
socket counterclockwise.
Transparent Lens Assembly
CAUTION!
The procedure is described as a guideline.
For the replacement of the lamp it is recom-
mended that you contact an authorized
dealer.
20_BV_OM_EN_USC_t.book Page 248
To Next Page
Loading...
