Jenny Science XENAX Xvi 48V8

17
5 Configuration Motor Type Jenny Science /
Motor customer specific
The XENAX® Servo Controller differentiates between
Jenny Science Motors LINAX® Lx, ELAX® Ex or ROTAX®
Rx, and linear motors from other manufacturers.
The setting is done on the hardware over a DIP
switch. The configuration is visible on the sticker with
the serial number. The Jenny Science motors are
automatically identified and parameterized.
Jenny Science Motors:
LINAX® Linear Motor Axis
ELAX® Linear Motor Slide
ROTAX® Rotary Axis
Motors from other manufacturers
Typically rotary servo motors
Motor Type
Bit 1
Bit 2
Bit 3
Bit 4
LINAX
®
/ ELAX® / ROTAX®
ON
ON
OFF
OFF
No JSC motor
OFF
OFF
ON
ON
A subsequent readjustment of motor type is possible
through the according setup of the DIP-switch. A
change in motor type should be updated on the
sticker with the serial number.
XENAX® Xvi 48V8
EtherCAT, Lx, Ex or Rx
SN Xvi-48V8.xxxx
JENNY SCIENCE AG
XENAX® Xvi 48V8
EtherCAT, No JSC motor
SN Xvi-48V8.xxxx
JENNY SCIENCE AG