Jenny Science XENAX Xvi 48V8 User Manual

58
10.12 Program
Please also consult the TUTORIAL Video
JSC Tutorial 5: Programming of a Pick and Place
System with XENAX® Master-Slave on our website, in
which you can follow a practical example.
Here you can define program sequences line by line.
PROGRAM
Select, create, copy or delete a program.
LINES
In this list all defined program lines of the present
program will be shown.
Maximum number of lines depends on program
mapping (PMAP, default = 0):
PMAP = 0
Prog 1-15: 50 lines
Prog 16-63: 10 lines
PMAP = 1
Prog 1-5: 130 lines
Prog 6-63: 10 lines
COMMANDS
CLEAR = Clears the Program-line
MOVE UP = Program-line will be moved up
MOVE DN = Program-line will be moved down
NEW LINE
A new program-line will be inserted in the last line
INSERT LINE
A new program-line will be inserted into any line. The
following program lines are shifted by one line.

Jenny Science XENAX Xvi 48V8 Specifications

General

Brand	Jenny Science
Model	XENAX Xvi 48V8
Category	Controller
Language	English