77
Note:
Alternatively, the XENAX® Ethernet Installer can be
used to update several XENAX® Servocontroller
simultaneously.
9.21.1 Display the actual license code
The activated licenses are displayed, when the
WebMotion® is starting.
Or under
WebMotion® Start-> Operation
-> firmware -> version
9.21.2 Subsequent license ordering
The MAC-address must be sent to Jenny Science for
any subsequent license ordering,
WebMotion® Start-> Operation
-> firmware -> version
Possible licenses:
LINAX® Linear motor axis
Force processes (Forceteq®)
LINAX® and Force processes (Forceteq®)
9.21.3 License activation
WebMotion® start
Click on firmware / update
To Next Page
Loading...