Setup Menu
Press the (setup) button (11) on the remote control to access the SETUP menu and adjust
system settings for the following categories:
• System Setup
• Language Setup
• Audio Setup
• Video Setup
• Digital Setup
While in the setup menus, use your directional arrows to select and change settings. The “up”
and “down” arrows highlight the options, and the “right” and “left” arrows will change the setting
for the highlighted option.
System Setup
The System Setup menu controls the
following features:
TV SYSTEM
: This item is used to select a TV signal system to match your TV set. Select one
of the following options: AUTO, NTSC or PAL .
SCREEN SAVER
: Turn Screen Saver feature On/Off.
RESOLUTION
: Select from 480I, 480P, 720P, 1080I or 1080P.
TV TYPE: Select one of the following picture formats: 4:3PS, 4:3 LB or 16:9. 4:3 is a letterbox
selection, and 16:9 is wide screen.
PASSWORD
: This item allows the selection of a new four-digit code to use for security
purposes.
RATING
: Select the parental control level for all DVD play. The security password is required to
make changes to this feature.
DEFAULT
: Use this item to restore default settings at any time.
Language Setup
The Language Setup menu controls the
following features:
On-Screen Display (OSD) Language
: Set the OSD language to one of the following: English,
Chinese, German, Spanish, French, or Russian.
Audio Language
: Set the audio language to one of the following: Chinese, English, Japan,
French, Spanish, Russian, Latin or German.
Subtitle Language
: Set the subtitle language to one of the following: Chinese, English, Japan,
French, Spanish, Russian, German or OFF.
Menu Language
: Set the menu language to one of the following: Chinese, English, Japan,
French, Spanish, Russian, German or Latin.
CEC
: Default setting of “ON” allows power ON/OFF and source selection controls between
devices connected via HDMI. Turn “OFF” to disable this feature.
To Next Page
Loading...
Need help?
General
