Why does my Jensen Car Receiver reset itself when the engine is off?
If your Jensen Car Receiver is resetting itself when the engine is off, it's likely due to an incorrect connection between the ACC and the positive battery wire. Check the wiring and correct it to resolve this issue.
How to fix a Jensen JRV9000 Car Receiver that will not power on?
If your Jensen Car Receiver unit doesn't power on, it might be due to an open radio fuse or car battery fuse. In this case, install a new fuse with the correct rating. Alternatively, an illegal operation might be the reason. To solve this, press the RESET button located in the middle of the left side of the front panel.
Why is there no audio output from my Jensen Car Receiver?
If you are experiencing no or low audio output from your Jensen Car Receiver, there might be several reasons: * Check the wiring and correct any improper audio output connections. * Increase the volume level if it is set too low. * Review the wiring diagram and check the “MUTE” connection. * Replace the speakers if they are damaged. * Adjust the channel balance to the center position if the volume balance is heavily biased. * Insulate all speaker wiring connections if the speaker wiring is in contact with a metal part of the car.
What to do if there is a flashing image on my Jensen Car Receiver?
If your Jensen Car Receiver displays a flashing image or interference on the screen, it could be due to the DVD not being compatible with the current TV system settings. Try changing the setup to accommodate the disc. Another cause might be improper video signal connections, so check the wiring and correct it if necessary.
Why is the sound quality poor on my Jensen JRV9000 Car Receiver?
If the sound quality from your Jensen Car Receiver is poor or distorted, it could be because you are using a pirated disc. Use an original copy instead. Another reason could be that the speaker power rating is not compatible with the unit; connect proper speakers. Finally, check the speaker contact, as the speaker might be shorted.
Why is the image blurred on my Jensen JRV9000?
If the image on your Jensen Car Receiver is blurred, distorted, or dark, it's likely because the disc being used is an illegally copied one. Use an original disc to resolve this issue.
How to fix prolonged image on Jensen Car Receiver?
If you are experiencing a prolonged image or improper height/width ratio display on your Jensen Car Receiver, it is likely due to an improper aspect ratio setup. Use the correct aspect ratio setting to resolve this.
Why is there no image on my Jensen Car Receiver?
If there is no image on your Jensen Car Receiver screen, ensure that the parking brake wire is correctly connected. Also, make sure the parking brake is engaged by stopping the vehicle in a safe place and applying the parking brake.
What to do if my Jensen JRV9000 Car Receiver says 'No Disc'?
If your Jensen Car Receiver is showing 'No Disc', it might be due to a dirty disc. Clean the disc with a soft cloth. Alternatively, the disc might be upside down; insert the disc with the label side up. Finally, ensure that a disc is actually present in the loading compartment and insert one if it's missing.
What does 'Bad Disc' mean on my Jensen JRV9000 Car Receiver?
If your Jensen Car Receiver displays 'Bad Disc', it could be because the disc is dirty. Clean the disc with a soft cloth. Another possibility is that the disc is upside down; insert the disc with the label side up.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 |
| Bluetooth | Yes |
| USB Input | Yes |
| Aux Input | Yes |
| Camera Input | Yes |
| Screen Size | 6.2 inches |
| DIN Size | Double DIN |
| Number of Channels | 4 |
| Touchscreen | Yes |
| SD Card Slot | Yes |
| Navigation | No |
| Apple CarPlay | No |
| Android Auto | No |
| Brand | Jensen |
| Model | JRV9000 |
| Category | Car Receiver |
| AM/FM Tuner | Yes |
| DVD Player | Yes |
| CD Player | Yes |
| Remote Control | Yes |
| GPS Navigation | No |
| Peak Power Output | 40 watts |
Details FCC limits for radiation exposure.
Lists playback and control options for DVD media.
Details compatibility and playback features for audio discs.
Outlines radio tuning, presets, and reception options.
Describes connection and playback for Apple devices.
Details satellite radio features and requirements.
Lists physical dimensions, display, and general unit functions.
Explains camera connectivity and built-in navigation.
Describes the disc slot and touch screen interface.
Details remote receiver and microSD card slot functions.
Describes the USB port and cover for external devices.
Details reset button and power/volume/mute functions.
Explains the function of the menu and disc eject buttons.
Explains remote functions for source, eject, audio, volume, and band selection.
Describes remote controls for playback, power, and menu functions.
Details remote functions for track skipping and playback control.
Explains direct track selection and random playback via remote.
Describes using the front AV input for external devices.
Details using rear RCA inputs for external audio/video.
Basic instructions for powering on/off and selecting playback sources.
Managing volume, beep feedback, and muting audio output.
Adjusting audio sound profiles and EQ settings.
Steps for inserting, playing, and ejecting discs.
How to perform a soft reset to resolve system issues.
Explains video display restriction based on parking brake status.
Guide to adjusting audio frequencies and sound profiles.
Customizing EQ bands or applying a flat response.
Resetting EQ and activating loudness enhancement.
Adjusting audio output levels and subwoofer settings.
General steps for modifying settings within sub-menus.
Configuring radio region, sensitivity, and screen settings.
Steps to calibrate the touch screen for accurate input.
Enabling or disabling audible feedback for selections.
Adjusting screen brightness, UI theme, and demo mode.
Controlling subwoofer audio and crossover frequency.
Inputting the date and configuring clock display (12/24hr).
Adjusting the hour, minute, and AM/PM.
Selecting display, audio, and subtitle languages for DVDs.
Choosing the language for DVD menu interaction.
Enabling core Bluetooth features and auto-connection.
Setting up and using a custom 4-digit code for device pairing.
Creating a password to manage parental lock features.
Configuring content rating limits and dynamic range control.
Restoring parental lock settings to factory defaults.
Setting relative volume for DVD, USB, Radio, and Bluetooth sources.
Setting volume for additional input sources.
Accessing information on model, hardware, and software versions.
Lists supported disc formats like DVD, CD, MP3.
How to play DVDs and navigate the DVD menu.
Understanding track, chapter, and time displays.
Using icons for track skipping, play/pause, and menu navigation.
Features like A-B repeat, audio/subtitle language selection.
Setting repeat modes for chapters, titles, or all.
Adjusting brightness, contrast, saturation, and hue for video.
Manually selecting DVD titles or chapters.
Procedures for handling discs and resetting the mechanism.
Selecting preferred languages for DVD audio and subtitles.
Understanding on-screen playback details for DVD and VCD.
Details on disc types, layers, and maximum play times.
Explains common symbols and region restrictions for discs.
Steps for inserting CDs and initiating playback.
Understanding controls within the CD playback screen.
Accessing track lists, shuffle, and repeat options for CDs.
Direct track selection and viewing track playback times.
Navigating the CD list screen to view files.
Understanding how to select different file types from the CD list.
Manually entering track numbers and handling discs.
Pausing, skipping tracks, repeat, and random play for CDs.
Specifications for recording MP3/WMA files on discs.
Supported file naming standards for MP3 discs.
How files are played back based on disc burning order.
Procedures for inserting discs and managing playback.
Setting repeat modes and random play for MP3/WMA.
Explains icons and controls on the radio display screen.
How to seek stations manually or automatically.
Saving and recalling radio stations.
Adjusting reception sensitivity and direct frequency tuning.
Browsing and selecting radio stations by program category.
Entering radio frequencies directly via the keypad.
Saving favorite stations to presets and recalling them.
Automatically finding and storing strong radio stations.
Adjusting for local or distant radio signal reception.
Step-by-step guide for connecting and disconnecting USB storage.
Identifying the physical locations of the USB and microSD slots.
Overview of controls and information displayed during USB playback.
Accessing file lists and enabling shuffle/repeat for USB.
Accessing EQ and manually selecting files from USB.
Navigating the USB list screen to view files.
Understanding how to select different file types from the USB list.
Manually entering track numbers for USB playback.
Adjusting video display settings for USB content.
How to connect and enter control mode for Apple devices.
Overview of controls and information for Apple device playback.
Skipping tracks, pausing, shuffle, and repeat for Apple devices.
Accessing EQ and browsing files on the connected iPod®.
Choosing different media types and navigating folders.
Managing track playback and pausing for Apple devices.
Describes using the front AV input for external devices.
Details using rear RCA inputs for external audio/video.
Explains HDMI/MHL for mobile device audio/video.
Steps for connecting Android devices using HDMI/MHL.
Connecting Apple devices via HDMI/MHL.
Displaying smartphone screen on unit, with/without touch control.
Guide to installing the necessary smartphone application.
Steps for pairing via Bluetooth and connecting via HDMI/MHL.
Calibrating the touch screen for smartphone control.
Notes on phone compatibility, distance, and charging.
Steps for successful pairing and unit recognition.
Tips for clear path, avoiding power saving, and call readiness.
Explains SRC, BT status, device names, and connection icons.
How to search for devices and access BT options.
Steps to start pairing from the unit's menu.
Accepting prompts, entering passkeys, and confirming successful connection.
How the unit manages incoming calls, including display and audio.
Importing contacts and accessing call history.
Making calls directly or ending them via the interface.
Answering, rejecting, and adjusting volume during calls.
Muting unit audio when a call is active.
Accessing and managing call history logs.
Moving audio between the mobile phone and the head unit.
Playing music from a phone via Bluetooth using A2DP/AVRCP.
Using pause/play, next/previous for BT music.
Managing BT calls while using navigation features.
Using PTT to access voice assistants like Siri/Google Voice.
How to access the camera display mode.
Configuring camera inputs, triggers, and priority.
Muting audio and enabling mic when in reverse.
Adjusting audio levels for cameras and main sources.
Switching between camera views and adjusting picture settings.
Information on SWC compatibility and required adapters.
Lists available steering wheel controls for common functions.
Guidance for installing and programming the PAC SWI-RC adapter.
Table detailing SWC function mapping and voltage references.
Steps to activate satellite radio subscription and find tuner ID.
Explains the first page of SiriusXM menus and icons.
Tuning by channel or category and using list search.
Details Band, Memory, Scan, Lock, and EQ functions.
How to select SiriusXM® as the audio source.
Entering channel numbers directly to tune SiriusXM®.
Saving current SiriusXM® channels to preset slots.
Accessing stored SiriusXM® channels from presets.
Finding channels using their direct numbers.
Browsing channels by musical or content category.
Locking mature content channels using a password.
Unlocking a specific mature channel with a password.
Disabling the mature channel lock for all channels.
Applying a lock to an individual channel.
Removing a lock from a specific channel.
Modifying the existing parental lockout password.
Explains common advisory messages and their resolutions.
Resolving issues with the unit not powering on or having low/no audio.
Addressing poor sound, distortion, and unexpected resets.
Resolving issues with no image, flashing, or aspect ratio problems.
Addressing weak station reception and disc insertion errors.
Solutions for discs that won't play, including condition and compatibility.
Resolving interruptions during MP3 playback due to disc condition or file errors.
Resolving errors like 'Loading', 'No Disc', 'Bad Disc', 'Unknown disc'.
Addressing region code errors and illegal mechanism operations.
Guidelines for cleaning the front panel and monitor.
Notes on temperature, condensation, and disc handling.
Technical details for disc playback and video formats.
Radio tuning ranges, sensitivities, and monitor resolution.
Input impedance, power supply, dimensions, and fuse rating.
Amplifier output power and performance ratings.
List of common replacement parts with their corresponding part numbers.
To Next Page
