Track Direct Entry
When the Direct Entry icon is touched the Direct Entry Screen appears. The
user can manually select a track by touching the corresponding number. After
entering the track numbers touch the OK icon. If a wrong digit is entered touching
the arrow will remove the number. After touching OK playback will begin.
CD Track Direct Entry Screen
Controlling Playback
Inserting a Disc - Upon inserting a CD, disc play begins. You cannot insert a disc if
there is already a disc in the unit or if the power is o.
Ejecting a Disc - Press the Eject ( ) button on the front of the unit to eject the
disc. The unit automatically reverts to Tuner mode. You may eject a disc with
the unit powered o. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal
core mechanism operation occurs, press and hold the Eject ( ) button on the
front of the unit to reset the loading mechanism. Normal operation resumes.
Pausing Playback - Touch the Play/Pause ( ) icon to suspend or resume disc
play.
Moving Through Tracks - Touch the Next ( ) icon to advance to the next track
on the disc. Touch the Previous ( ) icon to move to the previous track.
Repeat Playback - Touch the icon to alter repeat mode according to the
following:
• CD-DA: Repeat Track > Repeat Album > Repeat O
• CD-R/RW: Repeat Track > Repeat Album > Repeat O
Random Play Select - Touch the Random ( ) icon to play the tracks on the disc
in a random, shuffled order. Touch the Random ( ) icon again to cancel Random
Play mode.
Note: CD-R and CD-RW will not play unless the recording session is finalized.
To Next Page
Loading...
Need help?
General
