Jensen CDR462 - Page 7

Transferring Audio
Press to transfer call audio between the headunit and mobile phone
1. Hang Up
2. Call Transfer
3. MIC Mute
4. Return to Keypad
EQ Operation
Press EQ icon in each Source to select EQ settings
Source Tone Memory – Each Source will remember their EQ settings
1. Main System Volume
2. EQ Settings
3. EQ On/Off
4. Loudness On/Off
5. EQ Reset
6. Return to Source
7. EQ Presets / Custom
8. Balance / Fader
Subwoofer Frequency, Fader and Balance controls do not have Source Tone Memory.
1. Main Volume
2. Fader Reset
3. Subwoofer ON/OFF
4. Return to Source
5. Return to EQ Controls