Why does my Jensen Receiver have power but no sound?
If your Jensen Receiver has power but isn't producing any sound, it could be due to a few reasons. The speaker wires might not be properly connected, so you should check the connections at the speakers. Also, one or more speaker wires might be touching each other or the chassis ground. Make sure to insulate all bare speaker wires from each other and from the chassis ground.
How to fix a Jensen Receiver that won't turn on?
If your Jensen Receiver isn't powering on, there are several potential causes. First, the yellow wire might not be connected properly or have the incorrect voltage; check these connections to ensure they are receiving the proper voltage (11~16VDC). Secondly, the black wire might not be connected to ground, so verify this connection. Lastly, the fuse might be blown, in which case you should replace it.
Ensures video playback is disabled while the vehicle is in motion for driver safety.
Acknowledges copyright protection technology and ownership of Bluetooth trademarks.
Warning against operating unit while driving to prevent serious injury or death due to distraction.
Unit must be installed to prevent screen visibility from driver's seat as per state laws.
Unit functions only when parked with parking brake engaged; proper wire connection is critical.
Maintain low volume to hear external traffic sounds, preventing distraction and accidents.
Professional installation advised. Unit for 12VDC negative ground vehicles only. Read all instructions.
Secure grounding, avoid extreme environments, use correct fuses, and disconnect power before fuse replacement.
Clean screen with soft cloth only. Handle damaged LCD with care due to potentially hazardous liquid crystal.
Device meets FCC Part 15 rules, operating under conditions to avoid harmful interference.
Disconnect battery terminal. Avoid installing in extreme temperatures, dust, or vibration.
Remove transit screws, use keys to slide unit out, install mounting sleeve, connect wiring, and test.
Illustrates the typical front-load DIN mounting method for the unit.
Diagram details connections for front/rear speakers, power, ground, antenna, and microphone.
Wiring for video output, backup camera input, and subwoofer preamp output.
Notes on correct fuse usage (10A) and subwoofer output functionality.
Identifies and labels all buttons and ports on the front panel of the unit.
Labels the various icons displayed on the unit's screen for different functions.
Instructions for turning the unit on and off using specified buttons.
Press SRC to cycle through available input modes like Radio, Disc, USB, and Bluetooth.
Rotate volume knob for adjustment. Press knob to mute/unmute audio.
Connect audio sources via 3.5mm AUX input or USB port for playback.
Access the Main Menu via the arrow icon and navigate between screens using left/right arrows.
Navigate from the Main Menu to Settings to adjust General, Clock, Audio, Bluetooth, and Display options.
Adjust volume, EQ settings, loudness, EQ reset, presets, and balance/fader for personalized sound.
Information on using the equalizer for sound curves and balance/fader for audio distribution.
Visual guide to the radio screen, including band, presets, frequency, and controls.
Display current mode and return to Main Menu. Manage tuner presets for instant station access.
Switch between AM/FM bands and store/recall up to 18 FM and 12 AM preset stations.
Tune down by seeking or manual step. Use AS/PS for auto-storing/scanning presets.
Displays current station number. Search for specific stations or tune up/down by seeking or manual adjustment.
Access Audio Settings to adjust EQ, Fader-Balance, Loudness, and SRC Level for optimal sound.
Press to select between AM and FM bands for radio reception.
Overview of the media player screen with track info, time, and playback controls.
Select Bluetooth Music, Bluetooth Phone, or USB device from the Main Menu for playback.
Manage playback with Random, Repeat, Play/Pause, Tune Down/Up, and Direct File Entry features.
Adjust audio settings and view time indicator and ID3 metadata for current files.
Details compatibility for ISO9660, JOLIET, ROMEO file systems and .mp3, .rmp file extensions.
Information on compatible MPEG formats (1, 2, 2.5) and bitrate ranges for CD/DVD playback.
Compatibility for sampling frequencies and guidelines for file/folder naming conventions.
Restrictions on JPG viewing while driving; JPG viewer requires parking brake engagement.
Details compatibility for FAT file systems (FAT 12, 16/32) and .mp3, .rmp file extensions.
Information on compatible MPEG formats (1, 2, 2.5) and bitrate ranges for USB playback.
Compatibility for sampling frequencies and guidelines for file/folder naming conventions.
Restrictions on JPG viewing while driving; JPG viewer requires parking brake. Potential USB drive incompatibility.
Lists compatible CD/DVD types and highlights incompatible file formats like WMA, WAV, AAC.
MP3 playback begins in the root folder; skips empty or non-media folders.
ISO9660 standards: maximum folder depth, valid characters for file/folder names, and Joliet support.
For best results, use 128kbps or higher constant bit rate and 44.1kHz or higher sampling frequency.
Instructions for inserting a DVD for playback and using the eject button.
Tap screen to reveal controls for disc menu, audio settings, and chapter navigation.
Access disc menus, adjust audio settings, and navigate between previous/next chapters.
Enter chapter numbers directly for playback. Adjust audio settings as needed.
Options to repeat the current chapter or enable random playback of tracks.
Use the 'Next Page' option to display additional playback controls.
Pair and connect Bluetooth devices. Use device name 'JENSES CDR7011' and passcode '0000'.
Connect an external microphone to the MIC jack as no internal microphone is included.
Enable Auto Connect for seamless pairing and connection with previously paired devices.
Select 'Bluetooth Phone' from Main Menu or press phone icon to access phone features.
Manage calls using the Keypad, Contacts, Recents, and Device options on the screen.
Connect a call using 'Talk' and end the current call with 'End Call'.
Transfer calls between the head unit and mobile phone. Display keypad for dialing numbers.
Connect external audio sources to the 3.5mm AUX input and select via Main Menu.
Connect optional rear camera to Camera Input. Select manually or automatically via reverse lamp.
Use voice activation button for Siri/Google Assistant via Bluetooth. Requires phone pairing.
Built-in SWC Interface supports PAC steering wheel control modules, like the SWI-RC.
Lists available controls: Volume, Preset, Seek/Track, Band, Mode, BT Talk/End.
Hints for setting radio select switch and programming the SWI-RC for compatible units.
Table provides center pin and tip pin voltage reference for SWC function mapping.
Resolve no power, no sound, or blown fuse issues by checking connections, wires, and fuses.
Address excessive skipping, 'ERR FILE', 'NO FILE', or disc read errors.
Troubleshoot CD mechanism alignment, transit screws, and invalid ID3 tag notifications.
Details frequency response, channel separation, tuning ranges, and sensitivity for CD, FM, and AM tuners.
Lists USB charge rate, speaker impedance, line output voltage, dimensions, and CEA-2006 amplifier specifications.
Covers defects for 1 year (2 years with professional install). Excludes software, damage, misuse, and improper installation.
Steps for service: consult troubleshooting, pack product, provide details, contact authorized service center.
Excludes indirect, incidental, or consequential damages; limits implied warranties.
Device operates under Part 15 of FCC Rules, subject to conditions of no harmful interference.
Modifications not approved by the responsible party will void the user's authority to operate the equipment.
Recommended actions to correct harmful interference: reorient antenna, increase separation, or use different power circuit.
To Next Page
General
