21
OPERATIONCR271ML
Rear Camera
Connect an optional rear camera to the Rear Camera input (Yellow RCA)
connector for video Refer to the wiring diagram for details.
Manual selection - Touch the REAR CAMERA icon from the Main Menu or from
any operational mode (when enabled) to select camera mode. Touch the top left
area on the screen to exit camera mode.
Note: The manual mode is for dedicated cameras that are ALWAYS on while
driving, it is not meant for cameras that are connected to the vehicle’s reverse
light. The unit will automatically select camera mode when connected to the
reverse lamp circuitry.
Note: External video output is not active when using the rear camera input.
Connect an optional audio source into the auxiliary input on the right side of the
front panel.
Select the auxiliary input icon from the Main Menu to listen to audio.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Auxiliary Input
Connect an optional audio source into the rear A/V input.
Select A/V Input from the Main Menu to listen to audio.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
A/V Input
Front Camera
Connect an optional front camera to
the Front Camera inputs (Yellow RCA
connector for video). Refer to the
wiring diagram for details.
To access the front camera, touch the
CAMERA icon in the Main Menu. The
unit displays rear camera by default.
Press the Front Camera icon in the top
right corner to switch to front camera view.
To Next Page
Loading...
Need help?
General
