OPERATIONCR271ML
20
App Operation
The Jensen Smart app is the ultimate
wireless remote control for your receiver.
You can download the Jensen Smart app
from the Apple App Store or Google Play
Store and install it on your smartphone
or tablet. Scan the following QR code
to download the Jensen J-Link P1
application on your smartphone.
Voice Assistant
Your receiver is designed with an easy access voice activation button to use Siri®
or the Google Assistant™ via your car’s Bluetooth. Interact with your smartphone
assistant while you drive with only the push of a button!
Bluetooth should be paired between your smartphone and the receiver. Press
the voice activation button, and the receiver will switch into Bluetooth mode,
This will activate Siri® or Google Assistant™ on your smartphone. You will need
to manually switch back to the previous or desired mode once this operation is
terminated.
To Next Page
Loading...
