Why is there no sound coming from my Jensen JBD-100 Clock Radio?
If your Jensen Clock Radio produces no sound, first ensure it's properly connected to your Bluetooth device by going through the “LISTENING TO BLUETOOTH ENABLED DEVICE” process. If the problem persists, try moving the unit within the Bluetooth operating range (30 Feet). Also, check that the volume isn't set too low by pressing the Volume + Button.
How to fix distorted sound on Jensen JBD-100?
If your Jensen Clock Radio sound is distorted, try decreasing the volume. If you are using an external sound source like older generation of iPod, try reducing the output volume on the device itself. Also try turning bass boost OFF or change the EQ setting. If the cell phone original sound source is of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio source such as a music CD.
What to do if my Jensen JBD-100 does not respond?
If your Jensen Clock Radio does not respond, first check if the unit is properly connected to the AC outlet and reconnect if necessary. If it still doesn't work, try plugging the unit into another AC outlet to rule out power issues.
How to improve FM reception on Jensen JBD-100 Clock Radio?
If you're experiencing noise or distorted sound on FM broadcast with your Jensen Clock Radio, the station might not be tuned properly. Try retuning the FM broadcast station. Also, make sure the FM wire antenna is fully extended.
What to do if my cell phone will not charge on Jensen JBD-100?
If your cell phone won't charge with the Jensen Clock Radio, first, remove your cell phone from the charging cord and check for obstruction on the connectors. Also, ensure your cell phone is working properly before plugging it into the unit, and refer to your cell phone manual for details.
Why does my Jensen Clock Radio get warm?
It is normal for your Jensen Clock Radio to get warm after extended play at high volume. To resolve this, turn the unit off for a period of time or lower the volume.
General| Brand | Jensen |
|---|---|
| Model | JBD-100 |
| Category | Clock Radio |
| Language | English |
Explains FCC rules and limits for digital devices to prevent harmful interference.
Instructions for installing 2 AAA batteries for clock backup power.
Connect the included 5V 1500mA AC-DC adaptor to the unit and power outlet.
Configure 12/24 hour format, adjust hour and minute using specific buttons.
Set alarm time, select wake-up source (Radio, Beep, Bluetooth), and enable/disable alarms.
Turn on, select Radio mode, tune stations manually or automatically, and adjust volume.
Use the USB port to charge portable devices. Check charging current and avoid overcharging.
Solutions for unit not responding, no sound, and distorted FM broadcast.
To Next Page
