JCD2010
8
CD OPERATION
Insert and Eject Disc
Insert a disc, label-side up, with the unit turned on. “Cd” will display on the LCD and then unit
will play the first track on the disc. Press the eject button (2) to stop disc play and eject the disc.
The unit does not have to be turned on to eject the disc.
NOTE: If powered off, the unit will automatically power on when a CD is inserted.
Controlling Disc Playback
Track Select
• Press the >>| (19) or |<< button (18) for less than one second to advance to the next track
on the CD. CD play begins when the button is released.
•Press the -10 button (13) to skip ten tracks backward.
• Press the +10 button (14) to skip ten tracks forward.
• Press and hold the >|| 1 button (9) to begin playback from the first track on the disc.
• Press and hold the >>| (19) or |<< button (18) for >2 seconds to fast forward or fast
reverse through the disc.
Play/Pause Disc Playback (>|| 1)
Press the >|| 1 button (9) to suspend disc play. Press the >|| 1 button again to resume disc
Play.
Intro Scan (INT 2)
Press the INT 2 button (10) on the control panel to play the first 10 seconds of each track
sequentially. Press INT 2 again to stop Intro Scan and resume normal play at the current track.
Repeat Play (RPT 3)
Press the RPT 3 button (11) during disc play to repeat play the current track. Press RPT 3
again to stop repeat play.
Random Play (RDM 4)
Press the RDM 4 button (12) on the control panel during disc play to play all tracks on a CD in
random, shuffled order. Press RDM 4 again to stop random play.
To Next Page
Loading...
Need help?
General
