Jensen JWM20 - MP3;USB Playback Operations; Media Playback Controls; Connecting and Using USB Devices

9
JWM20
MP3/USB OPERATION
1
HDMI
P.SCAN
2
3
4 5 6 7 8 9
10
11
12
13
14161820 22
21 19 17 15
If the user connects a USB mass storage device, press BT/USB button (5) to
start USB playback. Changing modes or turning off the radio pauses playback.
Playback will resume exactly where paused when returning to digital file.
Insert a USB Device
The USB connector (16) is at the bottom right side of the panel.The LCD will
display “READING” while files are initially loaded. When USB removed, it will
automatically back to the previous mode before the USB is connected. During
other playback mode, when USB is connected, press BT/USB button (5)
repeatedly to enter USB playback mode direct.
Play/Pause
Press the  button (22) to suspend or resume media playback.
Next/Previous File
Press the or  buttons (12,11) to select the previous or next track.
Folder Up/Down
Press the 6/FD UP button (14) to access higher folder level (FOLDER UP)
Press the 5/FD DW button (15) to access lower folder level (FOLDER DOWN)
Repeat
Press the  button (17) on the control panel multiple times during playback to
select from the following repeat play options: RPT ONE, RPT OFF, RPT ALL and RPT
FOLD.
Random Shuffle
Press the  button (19) during playback to play all files in random, shuffled order.
Press  button (19) again to stop random play.
Fast Forward/Reverse
Press and hold the  or  buttons (12, 11) to fast forward or fast reverse.