What to do if my Bluetooth device won't connect to my Jensen Car Receiver?
If your Bluetooth device won't connect or pair with your Jensen Car Receiver, ensure that no other devices are currently connected. Disconnect any connected devices. On your smartphone or device, try turning Bluetooth off and then on again before attempting to pair.
How to fix a Jensen Audio system that will not turn on?
If your Jensen Audio system isn't turning on or the front panel isn't working, try these steps: First, press the reset button. If that doesn't work, check the fuse. Then, ensure there's 12V+ power on the accessory wire (RED wire) going to the radio. Finally, check the ground connection.
What to do if my Jensen Audio system turns on but there is no sound?
If your Jensen Audio system turns on but you're not getting any sound, here's what to check: * Make sure the volume, fader, and balance controls are properly adjusted. * Try the reset button. * Confirm that the correct speaker selection is made. * Verify the speaker connections are secure. * Check the speaker wires for any shorts or open circuits.
Why is there no AM or FM reception on my Jensen Audio system?
If you're not getting AM or FM reception on your Jensen Audio system: * First, make sure you're tuned to a valid station. * Then, check the antenna connection on the back of the stereo. * If the connection is fine, try using a different antenna.
What to do if my Jensen Audio system CD/DVD does not play correctly?
If your CD/DVD isn't playing correctly on your Jensen Audio system, try the following: * Make sure the disc is inserted correctly. * Check the disc for dirt, scratches, or other damage. * Try playing factory-made CDs. * Inspect the radio's chassis to verify shipping screws have been removed. * Check factory original CDs for compatibility warnings.
Why does my Jensen Audio system DVD play sound but no video?
If your Jensen Audio system DVD plays sound but no video, ensure the HDMI cable is connected from the HDMI output to the input on your television. Also, verify a clear line of sight for the IR signal and check the batteries.
How to fix a Jensen Audio system when the CD/DVD does not load fully?
If your Jensen Audio system CD/DVD isn't loading fully, ensure the unit has power and that no other CD/DVD is currently inside. Also, make sure the transport screw has been removed from the rear of the unit.
What to do if Jensen Car Receiver will not turn on?
If your Jensen Car Receiver isn't turning on or the front panel isn't working, try pressing the reset button. Also, check the fuse and ensure there is 12V+ on the accessory wire (RED wire) going to the radio. Finally, verify the ground connection is secure.
Why is there no sound coming from my Jensen Car Receiver?
If your Jensen Car Receiver turns on but produces no sound, first, check that the volume, fader, and balance controls are correctly adjusted. Then, try the reset button. Verify that the speaker selection and connections are correct. Also, check the speaker wires for shorts or open circuits.
How to improve AM/FM reception on my Jensen Car Receiver?
To improve AM or FM reception on your Jensen Car Receiver, first, make sure you are tuned to a valid station. Check the antenna connection on the rear of the stereo. If the issue persists, try using a different antenna.
General| Brand | Jensen |
|---|---|
| Model | JWM70A |
| Category | Car Receiver |
| Display | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| Radio Tuner | Yes |
| Rear Camera Input | Yes |
| Display Type | LCD |
| Preamp Outputs | Yes |
| Auxiliary Input | Yes |
| Tuner Bands | AM/FM |
| Weatherband | No |
| SiriusXM Ready | No |
| Remote Control | Yes |
| CD Player | No |
| Channels | 4 |
| Waterproof | No |
| Type | Digital Media Receiver |
| Audio Output Power | 200 W |
| Compatible Formats | MP3, WMA |
| Playable Media | USB, Bluetooth |
| Output Power | 50W x 4 |
Provides essential safety advice for operation and maintenance of the unit.
Offers guidance on cleaning and handling discs to prevent playback issues.
Guides on safely disconnecting the battery and selecting a mounting spot.
Details wiring requirements and illustrates audio/video connections.
Explains how to select modes and adjust audio parameters.
Guides on accessing and adjusting system configurations like Bluetooth.
Guides on setting clock, alarm, sleep timer, and performing a reset.
Describes the setup and function of HDMI Audio Return Channel.
Details how to store, recall, and automatically manage preset radio stations.
Guides on pairing new devices and managing existing ones.
Guides on downloading, installing, and connecting the control application.
Configures TV system, screen saver, password, and rating.
Sets various languages for OSD, audio, subtitles, menus, and audio output.
Offers solutions for common symptoms like no power, no sound, or connectivity problems.
To Next Page
