How to improve your wireless network (page 4 of 4)
To achieve high speed wireless routers use channel bonding, which means the router trasmits on
multiple channels simultaneously. Doing this the router use more of the available channels, and this
can lead to interference, because other networks then will use some of the same channels.
The setting that controls the number of channels (channel bonding) is called "Channel bandwidth."
For 2.4GHz you can choose between 20MHz (one channel) or 40MHz (two channels). For the 5GHz
you can also select 20/40MHz, but in addition you also have 80MHz (four channels).
If you have tried changing the channel on your router and still have an unstable wireless network we
recommend that you try to set the router to only transmit on one channel (20MHz) by following
below steps.
Login to router menu
- Enter http://192.168.38.1 in a WEB browser window.
- Username = admin
- Password = 1234
- Follow the below instructions for your router model.
AirLink 295150 v6 and AirLink 59300 v6:
AirLink 1000AC and Lynx 5000
AirLink 3000DG v3 and AirLink 7000AC
Click Advanced -> Wireless Basic Settings
Set channel bandwidth for 2.4GHz:
Click 2.4G and set Channel bandwidth to 20MHz
Click Save
Set channel bandwidth for 5GHz:
Click 5G and set Channel bandwidth to 20MHz
Click Save
Click Skip -> Advanced -> Advanced Settings
Set channel bandwidth for 2.4GHz:
Click 2.4GHz Wireless -> Advanced Settings
Set Channel bandwidth to 20Mhz
Click Apply + Continue
Set channel bandwidth for 5GHz:
Click 5GHz Wireless -> Advanced Settings
Set Channel bandwidth to 20Mhz
Click Apply + Continue
Click Advanced -> Wireless Basic Settings
Set Channel bandwidth to 20MHz
Click OK
Page 15
To Next Page
Loading...
Need help?
General
