Why Jensen VM9022 unit will not power on?
The Jensen Car Receiver might not power on due to a blown radio fuse. Install a new fuse with the correct rating. Also, check the car battery fuse and replace it if blown. In case of illegal operation, press the RESET button located in the bottom right corner of the front panel.
What to do if Jensen Car Receiver monitor stops at incorrect position?
If the monitor of your Jensen Car Receiver stops at an incorrect position, press the OPEN key to restart monitor movement if the moving path is blocked.
What causes prolonged image or improper height/width ratio display on Jensen Car Receiver?
If you observe a prolonged image or improper height/width ratio display on your Jensen Car Receiver, use the correct aspect ratio setting if the aspect ratio setup is improper.
What causes flashing image or interference on Jensen Car Receiver screen?
If a flashing image or interference appears on your Jensen Car Receiver screen, change the setup to accommodate the disc if the DVD is not compatible with current TV system settings. Check the wiring and correct any improper video signal connections.
How to resolve Tel-Mute malfunction on Jensen Car Receiver?
To resolve a Tel-Mute malfunction on your Jensen Car Receiver, check that the “MUTE” connection is not grounded and that it’s properly insulated if the “MUTE” wire is grounded.
What to do if Jensen VM9022 Car Receiver has no image?
If your Jensen Car Receiver shows no image, check the wiring and correct any incorrect connection to the parking brake wire. If the PRK SW is activated and the parking brake is not engaged, stop the vehicle in a safe place and apply the parking brake.
Why Jensen VM9022 unit resets itself when engine is off?
If your Jensen Car Receiver resets itself when the engine is off, check the wiring between the ACC and positive battery wire and correct it if the connection is incorrect.
What to do if Jensen Car Receiver remote control does not function?
If the remote control for your Jensen Car Receiver does not function, replace the battery with a new one if the battery is depleted. If the battery is installed incorrectly, remove it and install it correctly.
How to fix poor sound quality or distortion on Jensen VM9022?
To fix poor sound quality or distortion on your Jensen Car Receiver, use an original copy of the disc if a pirated disc is in use. Connect proper speakers if the speaker power rating is not compatible with the unit. Check the speaker contact if the speaker is shorted.
What to do if there is no/low audio output from Jensen Car Receiver?
If there is no or low audio output from your Jensen Car Receiver, check the wiring and correct any improper audio output connections. Increase the volume level if it is set too low. Review the wiring diagram and check the “MUTE” connection. Replace the speakers if they are damaged. Adjust the channel balance to the center position if it is heavily biased. Insulate all speaker wiring connections if they are in contact with a metal part of the car.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 |
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| Radio Tuner | AM/FM |
| DVD Player | Yes |
| Rear Camera Input | Yes |
| Peak Output | 50 watts |
| Compatible Formats (Audio) | MP3, WMA |
| Video Playback Formats | DVD, MP4 |
| Power Output | 50W x 4 Channels |
Lists key features of the VM9022 multimedia receiver, covering DVD, CD/MP3/WMA, AM-FM, Satellite Radio, and iPod compatibility.
Explains how to install the unit using the ISO DIN standard, including dashboard mounting.
Guides through installing the unit using a half-sleeve adapter, securing it to the dashboard opening.
Explains how to set and manage the anti-theft password for the unit, including the default password.
Explains how to play independent sources on front and rear screens, detailing limitations for DVD, USB, and SD cards.
Describes the tuner display, manual tuning, direct tuning, and using preset stations for radio operation.
Guides on switching to satellite radio mode and displaying the unit's Radio ID for subscription services.
Covers selecting stations, using preset modes, storing, recalling stations, and direct tuning for satellite radio.
Covers inserting, ejecting discs, resetting the mechanism, and accessing DVD/VCD video modes.
Introduces Bluetooth technology and covers the unit's Bluetooth user interface and call handling.
Guides on pairing phones, reconnecting, managing incoming/outgoing calls, and call transfer.
Addresses issues related to the unit not powering on, remote control malfunction, and self-resets.
Provides solutions for TFT monitor problems, tuner reception issues, and CD/DVD playback errors.
Covers troubleshooting for MP3, Satellite Radio, iPod playback, and general error messages.
Outlines what is covered under the limited warranty, what is excluded, and the warranty limitations.
To Next Page
