20
VM9224
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored
station.
Auto Store/Preview Scan (AS/PS)
Auto Store (AS)
To select six strong stations and store them in the current band:
1. Select a band (if needed).
2. Touch the AS button (23) on page 2/2 of the on-screen controls to activate
the Auto Store function.
The new stations replace stations already stored in that band.
Preview Scan (PS)
To scan the AM or FM band for a preview of available stations in your
particular area, touch the PS button (20). Touch again to stop preview scan.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a strong local radio
signal are played. To activate the Local function in AM/FM tuner mode, press
and hold the rotary encoder button (7) on the front panel. Press and hold the
rotary encoder again to turn Local off. When the Local function is active, the
LOC indicator at the top of the screen is illuminated.
P1 87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1MHz
P5 107.9MHz
P6 102.9MHz
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
Need help?
General
