How do I fix a prolonged image or improper height/width ratio display on my Jensen Car Receiver?
If you are experiencing a prolonged image or an improper height/width ratio display on your Jensen Car Receiver, it is likely due to an improper aspect ratio setup. Use the correct aspect ratio setting.
What to do if there is no audio output from my Jensen Car Receiver?
If you're experiencing no or low audio output from your Jensen Car Receiver, consider the following: * Check the wiring and correct any improper audio output connections. * Increase the volume level if it's set too low. * Review the wiring diagram and check the “MUTE” connection. * Replace any damaged speakers. * Adjust the channel balance to the center position if it's heavily biased. * Insulate all speaker wiring connections to prevent contact with metal parts of the car.
Why is the sound quality poor or distorted on my Jensen Car Receiver?
Poor sound quality or distortion on your Jensen Car Receiver could be due to several reasons. Using a pirated disc can cause this issue, so use an original copy. Also, ensure that the speaker power rating is compatible with the unit and connect proper speakers. Finally, check the speaker contact, as a shorted speaker can also lead to poor sound quality.
How to fix a Jensen Car Receiver remote control that is not working?
If the remote control for your Jensen Car Receiver isn't working, the battery may be depleted. Replace the battery with a new one. Also, check if the battery is installed incorrectly; remove it and reinstall it correctly.
What causes flashing images or interference on the Jensen Car Receiver screen?
Flashing images or interference on the Jensen Car Receiver screen can occur if the DVD is not compatible with the current video system settings. Change the setup to accommodate the disc. It can also be caused by improper video signal connections, so check the wiring and correct it.
Why is my Jensen Car Receiver having weak station searching?
Weak station searching on your Jensen Car Receiver can be due to a few reasons. The auto antenna may not be fully extended or properly connected; connect the auto antenna control cable properly. If you are trying to tune into an HD Radio broadcast that is too far away, change the tuning mode to “Analog”.
What causes interruptions during playback on my Jensen Car Receiver?
Interruptions during playback on your Jensen Car Receiver can occur if the disc is dirty or scratched; clean or replace the disc. It can also happen if the file is damaged or a bad recording; recreate the disc with good files.
Why is the image blurred, distorted, or dark on my Jensen Car Receiver?
If the image on your Jensen Car Receiver is blurred, distorted, or dark, it may be because the disc is illegally copied. Use an original disc.
Why doesn't the monitor on my Jensen Car Receiver open automatically?
If the monitor on your Jensen Car Receiver doesn't open automatically, the TFT Auto Open feature may be turned off. Turn TFT Auto Open on.
What causes a Tel-Mute malfunction in my Jensen Car Receiver?
A Tel-Mute malfunction in your Jensen Car Receiver can occur if the “MUTE” wire is grounded. Check that the “MUTE” connection is not grounded and that it’s properly insulated.
General| Screen Size | 6.2 inches |
|---|---|
| Touchscreen | Yes |
| Radio Tuner | AM/FM |
| DVD Player | Yes |
| Navigation | No |
| Resolution | 800 x 480 |
| USB Port | Yes |
| SD Card Slot | Yes |
| Bluetooth | Yes |
| Auxiliary Input | Yes |
| Power Output | 50W x 4 |
| Peak Output | 50W x 4 |
| Audio Formats Supported | MP3, WMA |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
Lists the key features of the Jensen VM9313 multimedia receiver.
Details optional accessories for enhanced functionality like navigation and Bluetooth.
Identifies and explains the function of buttons and the rotary encoder on the unit's front panel.
Overview of the functions and layout of the infrared remote control.
Instructions for opening, closing, tilting, and adjusting the TFT display.
Covers power on/off, mute, volume adjustment, and source selection.
Guides users through accessing and adjusting system settings like clock and language.
Detailed instructions for using the AM/FM and HD Radio tuner functions.
Instructions for accessing and operating XM Satellite Radio.
How to play DVD and VCD discs, including playback controls and menus.
Instructions for playing audio from CDs and DVDs, including controls.
Guidance on playing MP3 and WMA files from discs and USB devices.
Steps for pairing phones and managing calls and music via Bluetooth.
Instructions for connecting and controlling an iPod for music and video playback.
Provides solutions for common problems encountered with the unit.
Guidelines for cleaning and maintaining the unit to ensure longevity.
Technical details and performance data of the VM9313 receiver.
Information regarding warranty coverage, exclusions, limitations, and service.
Lists all included items and necessary tools for installation.
Steps for preparing the vehicle and connecting the unit's wiring harness.
Information on downloading a program for installation support.
Instructions for registering the product online for customer support.
To Next Page
