VM9224BT
Picture Adjustment
To
adjust monitor display settings, perform the
f100wing
steps:
1.
Press and hold the NAV button (5) to access the "BRIGHT" setting. Press
and hold twice to access the "CONTRAST" setting.
2.
Turn the rotary encoder to adjust the setting level.
3.
Press and hold the NAV button (5) again to exit the picture adjustment
menu.
Parking
Brake
Inhibit
When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire
is
grounded via the Parking Brake circuit, video will be
displayed.)
10
To Next Page
Loading...
