VM9224BT
2.
Select the Bluetooth setup option on the mobile phone
to
be paired
(please refer to the phone's instruction manual to learn how to enter
Bluetooth setup, turn Bluetooth on/off, and perform pairing).
NOTE: Some
phones
require a "pass
key"
or
pairing
code to connect.
If
your
phone
requires a
pass
key
or
pairing
code,
you
will
need
to
enter
this
number
in
the Pairing Code field
under
the Bluetooth SETUP menu.
The
default
pairing
code
for
many
phones
is
"0000". The
default
code
for
the VM9224BT
is
"1234". See "Bluetooth Sub-menu Features" on
page
14
for
instructions
on entering the
pairing
code.
3.
Select "VM9224BT" from the pairing list on the mobile phone.
•
If
pairing
is
successful, the TFT will display the paired mobile phone
model number or name (as specified
in
your phone's Bluetooth Setup
menu).
• If pairing fails, "Phone Pairing Fail" is displayed at the bottom of the
screen.
Reconnecting
Once the Bluetooth device has been paired, you can touch the connect
~
button (9) to reconnect.
NOTE: You can
only
connect
to a
phone
using
the
buttons
on the on-
screen Phone interface.
Each time the
~
button is touched, the head unit will automatically reconnect
with the mobile phone once (only if the mobile phone was previously paired
with the head unit).
Managing
Incoming
Calls
When connected to a Bluetooth phone, the unit will mute audio output, pause
CD play, and change to the Bluetooth screen when a call is received.
An
incoming phone number will appear at the top
of
the screen.
Answering
an
Incoming
Call
To
answer the call, touch the
~
button (11).
For best reception, speak loudly and clearly.
To
end the conversation, touch the
~
button (12). The screen will display the
call duration for 3 seconds, and then return
to
the previous mode.
Rejecting
an
Incoming
Call
Touch the
~
button to reject
an
incoming call. The call will revert to your phone
and can be answered directly or left for voice mail.
41
To Next Page
Loading...
