~NSEE>
VM9224BT
8.
Exit call listing display
9.
~:
ConnecUdisconnect Bluetooth device (phone, PDA, personal music
player, etc.) with hand-free function
1
O.
~:
Mute/un-mute microphone during active call
11.
~:
Answer incoming call/make call
12.
~:
Reject incoming call/end cali/quit pairing process/quit reading phone
book or call listing
13.
0:
Touch to view the SETUP menu
14. EQ: Touch to view the equalizer
15. Touch to view the SOURCE MENU and select a new playback source
16. Status indicators (phone mode, music mode, mic mute)
17.
iii:
Touch to access the direct entry screen
18
.•
: Touch to stop A2DP playback
19. Touch the scroll bar and arrows to view the previous/ next page
of
choices
(only visible when needed)
20. Toggle Music/Phone menu/mode
21.
~/II:
Play/Pause selected file
22.
I
......
:Touch to move to the previous file
23.
~~I:
Touch to move to the next file
Hands
Free Profile
(HFP)
To
use a phone wirelessly with this unit, it is necessary to first establish a
connection using Bluetooth wireless technology. Connection
is
normally
established using HFP (Hands Free Profile), which gives you full control
of
functions available
on
the telephone source. However, depending
on
your
phone, the connection may be made using HSP (Head Set Profile), making
some functions unavailable. This
is
a limitation
of
your phone, not the
VM9224BT.
Since there are a number of Bluetooth mobile phone implementations
available on the market, operations with your Bluetooth mobile phone using
this unit vary greatly.
Please refer to the instruction manual that came with your Bluetooth mobile
phone along with this manual while operating your phone with this unit.
Pairing
the
Bluetooth
System
with
Your
Mobile
Phone
and
Head
Unit
1.
Touch the
((~
button (7) to initiate the pairing process. Keep the mobile
phone within 2 meters
of
the head unit when pairing.
(To
terminate the
pairing process, touch the
((~
button again.)
40
To Next Page
Loading...
