19
VX3014
Receive a Call
By default, all incoming calls are received automaticaly.
1. If there is an incoming call,
VJGUETGGPYKNNCRRGCTő+PEQOKPI
ECNNŒ
.
2. You may touch the screen to select [
] or [ ].
Speak into the Bluetooth microphone.
Tip
t :PVDBOTFMFDUUPSFDFJWFDBMMTNBOVBMMZCZTFU<"VUPBOTXFS>UP0ò
status.
Adjust Bluetooth Settings
1. In Bluetooth menu, touch [ ].
The option menu is displayed.
2. Touch on the selected option to change the setting.
∙ [Bluetooth]: To turn on or o “Bluetooth” function.
∙ [Auto connect]: To turn on or o “Auto connect” function.
∙ [Auto answer]: To turn on or o “Auto answer” function.
∙ [Pin code]: To set paring code.
∙ [Phone sync]: Phonebook sync may take several minutes to load on
initial setup.
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution Profile. The mobile
phones supporting this function can transmit stereo audio, whereas
the ones not supporting this function can transmit mono audio only.
AVRCP
AVRCP is short for Audio/Video Remote Control Profile. The mobile
phones supporting this function can control the playback of a
Bluetooth audio player.
In the mode of the music player working, if you want to make a phone
call, you can press the number keys on the mobile phone. At the same
time the music player will stop. The TFT screen will display “Calling”,
after the call received, the voice will be transferred to the unit. When
the call ends, the screen will display music playing menu.
If there is an incoming phone call, the music player will stop, and the
screen will display “Incoming”. When the call ends, the screen will
display music playing menu.
To Next Page
Loading...
Need help?
General
