Jensen VX3014 Operating Instructions

8
VX3014
EQ Menu
The Audio Control feature allows you to easily adjust your audio system
to meet the acoustical characteristics of your vehicle, which vary
depending on the type of vehicle and its measurements. Proper setting
of the Fader and Balance boosts the eects of the cabin equalizer.
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [ EQ ] icon in the user interface and the EQ setup interface
will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ Optimal ] / [ Classic ] / [ Rock ] / [
Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters adjustment
bar.
[ User ]: Set the desired audio eect.
[ Flat ]: Select the original audio eect.
[
]: Cancel the equalizer function settings.
Adjust FAD BAL
You can adjust front/back/left/right balance of the speaker and the
subwoofer volume to get balanced listening effect according to the
surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ FAD_BAL ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Adjust subwoofer volume
Touch [
] / [ ] to adjust subwoofer volume from -8 to +8.
3. Adjust fader / balance value
Touch [
] / [ ] / [ ] / [ ] to adjust fader / balance value from
-14 to +14.
[
]: Front speaker
[
]: Rear speaker
[
]: Left speaker
[
]: Right speaker
Notes:
1. The parameters of the EQ modes has been preset and you can not
change them besides ‘User’.
2. The EQ mode will change to ‘User’ automatically when you adjust the
frequency value under the modes besides ‘User’.
3. The value of Sub is independent of EQ mode and can be adjusted
separately.

Jensen VX3014 Specifications

General

Brand	Jensen
Model	VX3014
Category	Car Receiver
Language	English